############# Italiano ###########

Chiavi da cambiare passando a V10:

FTPuser --> Username
FTPpassw --> Password

Chiavi che cambiarà la pagina impostazioni al salvataggio:

DisableWS -> EnableWS
LogDisable --> LogEnable
NTPServer = pool.ntp.org

# Offset timezone in ORE
TimeZone = 1
# Ora Solare
WinterTime = 1

############# English ###########

Keys to change when switching to V10:

FTPuser --> Username
FTPpassw --> Password

Keys that will change the settings page when saving:

DisableWS -> EnableWS
LogDisable --> LogEnable
NTPServer = pool.ntp.org

# Offset timezone in hours
TimeZone = 1
WinterTime = 1





v1.0  23/09/2020
v2.0  12/10/2020
        If not registered on the network it locks up and does not blink.
        Used SdFat library, no longer stores the whole ini, but parses it as needed
v3.0  Default IP if no DHCP or if forced by .ini
v4.0  SdFat updated
      No String usage
      FileIni modified by me
v5.0  Added Ethernet, FTP, Telnet, ModBus
      Civil
      SMS controls the relays
      Removed IO blinking
v5.1  PNP
      Response time
      Button interrupts calls
v5.2  Fixed some bugs on outputs from SMS
v5.3  Fixed bug where pointing to a string to be sent caused issues
      Improved debug / log

      Sketch uses 66372 bytes (25%)
      Global variables use 8696 bytes of dynamic memory.
      Flash 256KB (262144), RAM 32K (32768)
v6.0  Power on/off schedules.
v6.1  Fixed BUG -> Closing FTP caused reboot loop
v6.2  Requests modem version
v6.3  Life output and registered
v6.4  Bug: if a module is missing and modules trigger first, it also sent alarm afterwards
v6.5  Increased SPI current via DRVSTR register
v7.0  Added Modbus TCP and converted Modbus RTU to the same "ArduinoModbus" library
      Added TimeZone key
      Clock from NTP server
v7.1  4G Modem A
v7.2  Debug log to investigate freezes
v7.3  Life output under timer always blinking
      Timeout in play file.
v7.4  Multiple NTP servers
      Distinguished busy from rejected
      Reworked log and debug functions
v7.6  Swapped On/Off in timer
v7.7  Default LogDebug off
v7.8  If log and email are disabled, internet is not opened.
v8.0  Parameter modification via SMS
v8.1  Fixed DTMF notes in response to # for 4G
v8.2  Modbus bit indicating network registration
v8.3  Modbus RTU bug, second byte was lost. 4G modem automatic fallback to 2G
v8.4  Added AlarmOut4
      Added trigger also on expansions
v8.5  Added initial SIM / NO SIM test     (Do it and test it on A70 modem)
      After three minutes without network, reconfigures the modem
      At startup "Signal xx of 30"
v8.6  Log "Init SD" + SIM_4G Reset
v8.7  Key eMailApn -> APN
      Same .bin for NPN and PNP, added HwType key
      Key A76XX_Modem -> Modem
      Added SMS SelfTest
      Key EnableHours -> EnableTimer
      EnableSMSautotest = 1
      SMSnum = +393345787267
      SMSdesc = GEVINO alarm
v8.8  ETH-CS-Reset bug
v8.9  VoLTE
      Clock bug
v8.10 Added Gateway
      Added force IPv4
v9.0  Added HTML status page
      Fixed System Timer
      Fixed Alarm Disable via SMS
v9.1  Language change in 6 languages
      Enabling and disabling inputs via HTML
      File manager
      Upload and save disabled
v9.2  Fixed bug if an SMS arrives during a call
      10-bit DAC, previously 8-bit
v9.3  Enabled upload, edit, save, delete.
      Fixed multiple email sending
v9.4  Accelerated HTML, reduced to a compressed file
      Correct translations
v9.5  Increased debugging.
      On web page, SIM card missing and SIM card with PIN code
v9.6  Small improvement
v9.7  Fixed bug: long SMS arrival crashes (Advertisement)
      Changed sequence SMS -> CALL -> MAIL to SMS -> MAIL -> CALL
      Enabled Edit function on HTML page, firmware / config recognition
v10.0 Added AudioZero DMA
      SMS -> MAIL -> CALL also for Modbus
      Auto VoLTE off
      Added config page
      Web Server
      Clock from modem or Ethernet
v10.1 Disabled Auto VoLTE
v10.2 Option added to each input, reset # after Timer
v10.3 Memory optimization
      New file transfer method
v10.3 Memory optimization
      New file transfer method
v10.4 Small bug in log file
v10.5 Continus Call
v10.6 Solved Bug opening port 21
v10.7 Improved stability by repeatedly opening and closing the services.
v10.8 Improved WS Upload across the ocean
      Add Contacts and Groups
v11.0 Safe SD on V1.5 HW
      DNS set on static ip
v11.1 Optimisations for 4,000 alarms, Modbus map
v11.2 Solved minor bug on SMS sent. Corrupted text.
v11.3 Enabled WDT, some improvment
v11.4 SSL/STARTTLS configuration added for email
      The Modbus bits reset automatically at the end of the operation. The alarm is mirrored on register 0 when it arrives from the map.