// Define v1.3
// Per GEVINO opto v1.2 v1.3 v1.4


#define In1_name  A5
#define In2_name  38 // PA13
#define In3_name  2
#define In4_name  3
#define In5_name  4
#define In6_name  5
#define In7_name  6
#define In8_name  7
#define In9_name  8
#define In10_name 9
#define In11_name 45
#define In12_name 44
#define Rs485_TxEn  A0
#define SD_CS 12

#define In1  !digitalRead(In1_name)
#define In2  !digitalRead(In2_name) // PA13
#define In3  !digitalRead(In3_name)
#define In4  !digitalRead(In4_name)
#define In5  !digitalRead(In5_name)
#define In6  !digitalRead(In6_name)
#define In7  !digitalRead(In7_name)
#define In8  !digitalRead(In8_name)
#define In9  !digitalRead(In9_name)
#define In10 !digitalRead(In10_name)
#define In11 !digitalRead(In11_name)
#define In12 !digitalRead(In12_name)
#define Out1_name A1  // PB08
#define Out2_name A2  // PB9 
#define Out3_name A3  // PA4
#define Out4_name A4  // PA5
#define Out5_name 42  // PA03
#define Out6_name 27  // PA28
#define Out1 digitalRead(Out1_name)
#define Out2 digitalRead(Out2_name)
#define Out3 digitalRead(Out3_name)
#define Out4 digitalRead(Out4_name)
#define Out5 digitalRead(Out5_name)
#define Out6 digitalRead(Out6_name)
#define setOut1 digitalWrite(Out1_name, HIGH)
#define resOut1 digitalWrite(Out1_name, LOW)
#define setOut2 digitalWrite(Out2_name, HIGH)
#define resOut2 digitalWrite(Out2_name, LOW)
#define setOut3 digitalWrite(Out3_name, HIGH)
#define resOut3 digitalWrite(Out3_name, LOW)
#define setOut4 digitalWrite(Out4_name, HIGH)
#define resOut4 digitalWrite(Out4_name, LOW)
#define setOut5 digitalWrite(Out5_name, HIGH)
#define resOut5 digitalWrite(Out5_name, LOW)
#define setOut6 digitalWrite(Out6_name, HIGH)
#define resOut6 digitalWrite(Out6_name, LOW)
#define setLed  digitalWrite(LED_BUILTIN, HIGH) // Yellow front Led
#define resLed  digitalWrite(LED_BUILTIN, LOW)  // Yellow front Led
#define set_Rs485_TxEn  digitalWrite(Rs485_TxEn, HIGH)
#define res_Rs485_TxEn  digitalWrite(Rs485_TxEn, LOW)

void gevino_io_setup( void ){
	
// Define Output
  pinMode(Out1_name, OUTPUT);       // Set Out1_name digital pin as Output
  pinMode(Out2_name, OUTPUT);
  pinMode(Out3_name, OUTPUT);
  pinMode(Out4_name, OUTPUT);
  pinMode(Out5_name, OUTPUT);
  pinMode(Out6_name, OUTPUT);
//  pinMode(LED_BUILTIN, OUTPUT); // Yellow front Led

// Define Input Pullup
  pinMode(In1_name, INPUT_PULLUP); // In01
  pinMode(In2_name, INPUT_PULLUP); // In02
  pinMode(In3_name, INPUT_PULLUP); // In03
  pinMode(In4_name, INPUT_PULLUP); // In04
  pinMode(In5_name, INPUT_PULLUP); // In05
  pinMode(In6_name, INPUT_PULLUP); // In06
  pinMode(In7_name, INPUT_PULLUP); // In07
  pinMode(In8_name, INPUT_PULLUP); // In08
  pinMode(In9_name, INPUT_PULLUP); // In09
  pinMode(In10_name, INPUT_PULLUP);// In10
  pinMode(In11_name, INPUT_PULLUP);// In11
  pinMode(In12_name, INPUT_PULLUP);// In12
  pinMode(Rs485_TxEn, OUTPUT);
  res_Rs485_TxEn;

  resOut1;
  resOut2;
  resOut3;
  resOut4;
  resOut5;
  resOut6;
}

void testLeds( void ){       // Accende la maggior parte dei led per le foto
// Define Output
  pinMode(Out1_name, OUTPUT);       // Set Out1_name digital pin as Output
  pinMode(Out2_name, OUTPUT);
  pinMode(Out3_name, OUTPUT);
  pinMode(Out4_name, OUTPUT);
  pinMode(Out5_name, OUTPUT);
//  pinMode(LED_BUILTIN, OUTPUT); // Yellow front Led
  pinMode(Out6_name, OUTPUT);

// RS485
  pinMode(Rs485_TxEn, OUTPUT);       // Set Tx Enable
  pinMode(1, OUTPUT);        // Set Tx
  digitalWrite(Rs485_TxEn, HIGH);
  digitalWrite(1, LOW);

// RS485 Tx
  delay(200);
  digitalWrite(1, HIGH);  
  delay(200);
  digitalWrite(1, LOW);

// RS485 TxEn
  digitalWrite(A0, LOW);  
  delay(200);
  digitalWrite(A0, HIGH);

  pinMode(26, OUTPUT); // Tx Led
  digitalWrite(26, LOW);
  delay(200);
  digitalWrite(26, HIGH);
 
  pinMode(25, OUTPUT); // Rx Led
  digitalWrite(25, LOW);
  delay(200);
  digitalWrite(25, HIGH);

//  pinMode(LED_BUILTIN, OUTPUT); // Led
//  digitalWrite(LED_BUILTIN, HIGH);
//  delay(200);
//  digitalWrite(LED_BUILTIN, LOW);
  
  pinMode(In1_name, OUTPUT); // In01
  digitalWrite(In1_name, LOW);
  delay(200);
  digitalWrite(In1_name, HIGH);

  pinMode(In2_name, OUTPUT); // In02
  digitalWrite(In2_name, LOW);
  delay(200);
  digitalWrite(In2_name, HIGH);

  pinMode(In3_name, OUTPUT);  // In03
  digitalWrite(In3_name, LOW);
  delay(200);
  digitalWrite(In3_name, HIGH);

  pinMode(In4_name, OUTPUT);  // In04
  digitalWrite(In4_name, LOW);
  delay(200);
  digitalWrite(In4_name, HIGH);

  pinMode(In5_name, OUTPUT);  // In05
  digitalWrite(In5_name, LOW);
  delay(200);
  digitalWrite(In5_name, HIGH);

  pinMode(In6_name, OUTPUT);  // In06
  digitalWrite(In6_name, LOW);
  delay(200);
  digitalWrite(In6_name, HIGH);

  pinMode(In7_name, OUTPUT);  // In07
  digitalWrite(In7_name, LOW);
  delay(200);
  digitalWrite(In7_name, HIGH);

  pinMode(In8_name, OUTPUT);  // In08
  digitalWrite(In8_name, LOW);
  delay(200);
  digitalWrite(In8_name, HIGH);

  pinMode(In9_name, OUTPUT);  // In09
  digitalWrite(In9_name, LOW);
  delay(200);
  digitalWrite(In9_name, HIGH);

  pinMode(In10_name, OUTPUT);  // In10
  digitalWrite(In10_name, LOW);
  delay(200);
  digitalWrite(In10_name, HIGH);

  pinMode(In11_name, OUTPUT);  // In11
  digitalWrite(In11_name, LOW);
  delay(200);
  digitalWrite(In11_name, HIGH);

  pinMode(In12_name, OUTPUT);  // In12
  digitalWrite(In12_name, LOW);
  delay(200);
  digitalWrite(In12_name, HIGH);

  pinMode(Out1_name, OUTPUT);       // Set Out1_name digital pin as Output
  setOut1;
  delay(200);
  resOut1;
  
  pinMode(Out2_name, OUTPUT);
  setOut2;
  delay(200);
  resOut2;
  
  pinMode(Out3_name, OUTPUT);
  setOut3;
  delay(200);
  resOut3;
  
  pinMode(Out4, OUTPUT);
  setOut4;
  delay(200);
  resOut4;
   
  pinMode(Out5_name, OUTPUT);
  setOut5;
  delay(200);
  resOut5;
  
  pinMode(Out6_name, OUTPUT);
  setOut6;
  delay(200);
  resOut6;

  delay(200);
// All On
  digitalWrite(1, HIGH);
//  pinMode(26, OUTPUT); // Tx Led
  digitalWrite(26, LOW);
//  pinMode(25, OUTPUT); // Rx Led
  digitalWrite(25, LOW);
//  digitalWrite(LED_BUILTIN, HIGH);
  digitalWrite(In1_name, LOW);
  digitalWrite(In2_name, LOW);
  digitalWrite(In3_name, LOW);
  digitalWrite(In4_name, LOW);
  digitalWrite(In5_name, LOW);
  digitalWrite(In6_name, LOW);
  digitalWrite(In7_name, LOW);
  digitalWrite(In8_name, LOW);
  digitalWrite(In9_name, LOW);
  digitalWrite(In10_name, LOW);
  digitalWrite(In11_name, LOW);
  digitalWrite(In12_name, LOW);
  setOut1;
  setOut2;
  setOut3;
  setOut4;
  setOut5; 
  setOut6;

  delay(1000);
// All off
  digitalWrite(1, LOW);
  digitalWrite(26, HIGH);  // Tx
  digitalWrite(25, HIGH);  // Rx
//  digitalWrite(LED_BUILTIN, LOW);  // Led
  digitalWrite(In1_name, HIGH);
  digitalWrite(In2_name, HIGH);
  digitalWrite(In3_name, HIGH);
  digitalWrite(In4_name, HIGH);
  digitalWrite(In5_name, HIGH);
  digitalWrite(In6_name, HIGH);
  digitalWrite(In7_name, HIGH);
  digitalWrite(In8_name, HIGH);
  digitalWrite(In9_name, HIGH);
  digitalWrite(In10_name, HIGH);
  digitalWrite(In11_name, HIGH);
  digitalWrite(In12_name, HIGH);
  resOut1;
  resOut2;
  resOut3;
  resOut4;
  resOut5;
  resOut6;
  
}